Internal Wiki | Information

Information
CRORZAR MOTIONS - Why we don't use them anymore
We have had a lot of false alarms and sometimes where they haven't picked up motion when they should. Also the battery life on these seems to be worse than a 2GIG motion. Mainly though the Crorzar motions have a ball joint and swivel. Although ...
How to ARM and DISARM the alarm system on a GC2 panel
Crorzar motion settings
CRORZAR MOTION SETTINGS There are 3 DIP switches located just left of the battery. For normal operation they should all be to the far left. If the customer is having false alarms we can set the top switch to the right, this will make it so ...
Installer codes from different alarm companies

Popular Articles
Temperature Sensor (fridge, freezer or walk-in) install-ZL
Zoho Learn EA 200 or EA400 temperature sensor installation The EA200 or EA400 must be connected to 3 things: Power (12 VDC @ 1A transformer), a temp probe and a dw10 equivalent device. The temp probe is wired into terminals that go on Sensor 2 (Zone ...
How to install a GC3 alarm panel and run wire.
How to install a 2GIG Glassbreak
How to install a panic button / pendant
How to install a 2GIG motion detector

Internal Wiki | Information | Knowledge Base