SALTOKS Online account creating
Go to app.saltoks.com from any browser. Login using your salto user account given from Savi. ie salto44@getsavi.com
Make sure you are in the correct customer account. The top left corner you can click for a dropdown of all the customers you have access to.
Go to the SITE tab at the top and then Hardware on the left.
Click on +IQ And enter the new IQ information. The activation code is on the inside of the IQ.
Once the IQ has been added, click on the Actions dropdown of the new IQ and select + Lock
Go through the 3 steps of adding the lock
Step 1: Name the lock and enter the 8 digit MAC number on the lock. For Geos it is located under the battery and for escutcheon locks it is located under the microchip.
Step 2: In the Saltoks app on your phone you need to activate the IQ and then generate a code for that IQ in order to link the lock to the IQ. Go through the steps to activate the IQ you are working with.
Once you have activated the IQ, generate a code by clicking Get Code. Then enter the code in the website.
Step 3: The lock now just needs to be finalized. Make sure that the IQ and the lock are in the places where they will remain so that the pathway that works best will be what is learned in. Once they are in the places that they will be installed, hold the maintenance card up to the lock. It will blink orange multiple times and then turn green. Once it turns green it has successfully connected and you can click DONE on the website.
Add Tags - Stay in the Site tab, click on Tags on the left, then + ADD TAGS at the top
Select the lock where you will be learning in the tags.
You have 120 seconds to learn in the tags. Put a tag up to the lock reader until it blinks red. Then a “1” should show up under the registered tag(s) at the bottom. Repeat this until all the tags have been learned in.
Create an Access Group for that lock. Go to ACCESS at the top. First thing is to add the lock to the ALL ACCESS GROUP. Click on the Name of the access group.
Click on Locks on the left and you will see the locks that are in that group on the left and the ones that aren’t in the group on the right. Select the lock you want to add and then click ADD 1 LOCK TO THE GROUP
Create a new Access Group. Click + ADD ACCESS GROUP
Name the Access Group and click Next Select the people in the group and click Next
Select the lock for that Access Group and click Next Click ALWAYS for the time frame
Review the info for the Access Group then click Create
Add a user to the site - Click on People on the top. Then click on + Create User for a new user. (If adding someone that already has Salto access somewhere else click + Invite).
Enter the new persons information and assign them a tag from the drop down list. Click Next
If they are just a basic user don’t select anything different. If they are going to be an admin change their role and enter their email. Mobile Key means their phone will work as a tag when they are close to the lock (only on some locks) Remote Opening means they can use the app from their phone to send a command to the lock to be able to lock/unlock it.
Select which access group the user will belong to
Go over the summary to make sure it’s correct. Then click Next and Create and it will create the user.